How to Pick the Best Electrician Training School near Mitchell Georgia
The initial step to becoming an electrical tradesman or contractor is enrolling in an electrician trade school near Mitchell GA. But with numerous technical schools to choose from, just how do you tackle making sure that you enroll in the right one? Particularly since there are a number of variables to consider. For instance, some potential students will start by looking for schools that are nearby their residence. After they have identified a few that are within driving range, they will select the one with the most affordable tuition. Although cost and location are important, they are not the only qualifications that must be evaluated. Also important are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and additional qualifiers should influence your final judgment when picking an electrician school. We will address that checklist in more detail later in this post. But first, let’s review a little bit about becoming an electrician and the training choices that are offered.
Click Here to Get Free Information on Electrician Schools Near You!
Electrician Degree, Diploma and Certificate Options
There are three general options to obtain electrician training in a vocational or trade school near Mitchell GA. You can choose a diploma or certificate program, or obtain an Associate Degree. Bachelor’s Degrees are obtainable at some schools, but are not as common as the other three options. Often these programs are offered combined with an apprenticeship program, which are mandated by most states to become licensed or if you intend to become certified. Following are short descriptions of the three most prevalent programs available.
- Diploma and Certificate Programs are generally offered by Georgia technical and trade schools and take approximately a year to finish. They provide a good foundation and are aimed towards those who want to join an apprenticeship more quickly as a journeyman electrician.
- Associate Degree Programs involve two years to complete and are provided by Georgia junior or community colleges, usually as an Associate Degree in Electrical Technology. They furnish a more well-rounded education while providing the foundation that readies students to begin their apprenticeship program.
As earlier mentioned, Bachelor’s Degrees are offered at certain Georgia institutions, but are less favored at four years than the other briefer programs. Most states mandate that an apprenticeship of no less than 2 years and in most cases 4 years be completed prior to licensing. Therefore, many students are anxious to commence their paid apprenticeship, particularly if it’s not part of their educational program.
Electrician License and Certification Prerequisites
Electricians in Mitchell GA can perform a vast array of tasks, such as installing, replacing and testing electrical systems, and making sure that the wiring in buildings and homes comply with code standards. After completing an apprenticeship, journeyman electricians are mandated to become licensed in most states or municipalities. The length of apprenticeship varies by state, but normally about four to five years of practical experience is required before taking the licensing exam. The exams usually assess electrical theory and general knowledge, in addition to understanding of the National Electrical Code (NEC). Receiving certification is also an optional means for an electrician to distinguish her or himself as a skilled and experienced professional. The certifications offered differ by state and may be acquired in many specializations, such as cable splicing as an example. The certification procedure usually involves three levels of proficiency:
- An experience requirement
- Passing a written exam
- Passing a practical exam
Examples of certifying organizations include the National Joint Apprenticeship and Training Committee (NJATC) as well as the National Institute for Certification in Engineering Technologies (NICET). It’s imperative that the electrician vocational school that you enroll in not only delivers a solid educational foundation, but also helps prepare you for passing any licensing and certification exams that you may be required to take in the future.
Attending Electrician Schools Online
An alternative that you may have considered is choosing an electrician online program to earn a certificate or degree. Although online schools are becoming more popular as a way of attending class without needing to travel, in this case they are not completely internet based. Virtually all electrician schools require some attendance on campus to obtain hands-on practical training. But since the remainder of the classes can be attended online, internet learning might be a more practical choice for individuals that have minimal time for schooling. And as an added benefit many online schools have a lower tuition cost compared to their on campus alternatives. Travelling costs from Mitchell GA are also minimized and a portion of the study materials can be accessed online also. Each of these advantages can make online electrician vocational schools more affordable and accessible. And a number are fully accredited, which we will discuss in our due diligence checklist.
Points to Ask Electrician Training Schools
When you have decided to obtain a diploma, certificate or degree, you can start to focus your school options. Because there are so many electrician trade and vocational schools in the Mitchell GA region, it’s essential to have a checklist of qualifications that each school must satisfy. The initial two that we mentioned were location and the cost of tuition. If you have an interest in earning an degree online, then that needs to be a feature that your final school offers. And even though all three qualifiers may be important when making your decision, there are additional factors that need to be considered as well. Following is a checklist of those additional qualifiers that you will need to research prior to selecting an electrical trade school.
Accreditation. Numerous electrician vocational programs have earned either a regional or a national accreditation. They can acquire Institutional Accreditation, which focuses on the school’s programs as a whole, or Programmatic Accreditation, which pertains to a specific program, for example electrical technology. Confirm that the Mitchell GA school is accredited by a U.S. Department of Education approved accrediting agency, such as the Accreditation Board for Engineering and Technology. Along with helping guarantee that you obtain a superior education, it may help in obtaining financial assistance or student loans, which are often unavailable for non-accredited programs. Additionally, a number of states mandate that the electrician training course be accredited in order to be approved for licensing.
High Completion and Placement Rates. Ask the electrician schools you are looking at what their completion rates are. The completion rate is the percentage of students who enroll in and finish the program. A lower completion rate could suggest that students were dissatisfied with the course and dropped out. It might also signify that the teachers were not competent to instruct the students. It’s similarly essential that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive directory of graduates, which can result in more contacts for the school to utilize for their apprenticeship and job placement programs. A high job placement rate can not only confirm that the school has an excellent reputation within the field, but additionally that it has the network of contacts to assist Mitchell GA students secure apprenticeships or employment.
Apprenticeship Programs. Most electrician technical programs are taught along with an apprenticeship or an internship program. Those participating technical and vocational programs will help place you in an apprenticeship program inside their network of electrical businesses or trade unions. Find out if the schools you are reviewing have working partnerships with Mitchell GA area electricians or electrical contractors. An apprenticeship not only offers a valuable experience by supplying hands-on training, but it also furnishes employment opportunities and helps to build relationships in the area electrician professional community.
Modern Facilities. Make sure that the school facilities and the equipment that you will be trained on are state-of-the-art and what you will be using on the job. If you are already in an internship or an apprenticeship, talk to the electrical tech you are working with concerning what you should be expecting. Otherwise, ask a local Mitchell GA electrical contracting company if they can give you some pointers. Also bear in mind that unless you are able to relocate, the school needs to be within commuting distance of your Mitchell home. Remember that if you decide to attend an out-of-state school, besides the added moving costs there might be higher tuition charges compared to in-state residents.
Smaller Classes. It’s desirable that you get as much personalized training as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can see how big they are and witness first hand the interaction between teachers and students. Speak to several of the students and get their comments regarding class sizes and instruction. Last, talk to a few of the teachers and find out what their level of expertise is and what certifications or degrees they have earned.
Flexible Scheduling. Make sure that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you are only able to go to classes at night or on weekends near Mitchell GA, check that the programs you are comparing offer those options. If you can only attend part-time, be sure that the school you select offers part-time enrollment. Also, find out what the policy is to make-up classes should you miss any due to work, illness or family emergencies.
Master Electrician Classes Mitchell Georgia
Picking the right electrical trade school will undoubtedly be the most critical decision you will make to start your new career. You originally came to this website due to an interest in Master Electrician Classes and wanting more information on the topic Electrical Training. But as we have covered in this article, there are several factors that you will need to evaluate and compare between the training programs you are reviewing. It’s a prerequisite that any electrician training program that you are considering includes a lot of hands-on instruction. Classes should be small in size and each student must have their own equipment to train with. Classroom teaching needs to offer a real-world context, and the training program should be up-to-date and conform with industry standards. Training programs differ in duration and the kind of credential offered, so you will need to decide what length of program and certificate or degree will best fulfill your needs. Every program provides different possibilities for certification as well. Perhaps the best approach to research your final list of schools is to visit each campus and speak with the students and instructors. Invest some time to attend a few classes. Tour the campus and facilities. Make certain that you are confident that the program you choose is the ideal one for you. With the right training, effort and commitment, the final result will be a new trade as a professional electrician in Mitchell GA.
More Electric Locations in Georgia
Mitchell, Georgia
Mitchell is located in western Glascock County at the intersection of State Routes 102 and 123. SR 102 leads east 6 miles (10 km) to Gibson, the Glascock County seat, and southwest 19 miles (31 km) to Sandersville, while SR 123 leads northwest 18 miles (29 km) to Sparta.
According to the United States Census Bureau, the town of Mitchell has a total area of 1.5 square miles (3.8 km2), of which 0.01 square miles (0.02 km2), or 0.42%, is water.[4] It is located 2 miles (3 km) east of the Ogeechee River.
As of the census[2] of 2000, there were 173 people, 72 households, and 51 families residing in the town. The population density was 119.2 people per square mile (46.1/km²). There were 77 housing units at an average density of 53.0 per square mile (20.5/km²). The racial makeup of the town was 83.82% White and 16.18% African American.
Business Results 1 - 10 of 0
